Restore Pavers San Diego – When Should You Seal Pavers

No matter how well you get your pavers installed and how well you care for them, there will come a time when you will need to restore pavers San Diego. This is because these outdoor elements are constantly exposed to the elements. They will, without a doubt, fade, chip, break, or sink over time. When this happens, you can fix the damaged pavers cost-effectively. But did you know that getting your pavers sealed will make them last longer and look better?

While pavers are versatile and look amazing in any outdoor environment, it is important to get them sealed so as to keep them functioning and looking good for the longest time. Getting the pavers sealed will reduce the frequency of having to restore pavers San Diego. You will also enjoy a number of benefits including the following:

  • Sealing protects pavers from fading. UV rays are what cause pavers to fade. You can reduce UV degradation by getting the pavers sealed.
  • Enhance the colors. A sealer works like a varnish. The sealer will draw out the vibrant colors of your pavers. You can even go for sealers that have a wet look. This will be great for the patio paver.
  • Stabilize the interlocking joint sand. When interlocking sand is blown away, individual pavers start shifting and causing all manner of problems. Getting pavers sealed will lock this sand in place.
  • Stain removal. Sealed pavers are less porous. They don’t soak up dirt, oil, and other substances. They are thus easier to clean.

The above are the key benefits of getting your pavers sealed. But when should pavers be sealed?

When to Seal Pavers

The majority of manufacturers recommend that you get the pavers sealed after 1 year after installation. The wait helps the naturally-occurring dusty build-up (known as efflorescence) to escape from the pavers. If you don’t wish to wait that long before getting your pavers sealed, you can use breathable sealers. With these sealers, you can get the pavers sealed as soon as they are installed. This is because the efflorescence will escape through the sealer.

Getting your pavers sealed is a great decision irrespective of how old your pavers are. You simply need to find the right sealant. The sealant you use has to be designed for your type of pavers. Second, you have to restore the pavers before getting them sealed. Third, the sealer has to be applied correctly. It doesn’t hurt to work with an experienced professional to help with that.

Restore Pavers San Diego

 

Restore Pavers – Why Should You Seal Pavers?

To increase the appearance of a property, homeowners frequently include concrete paver patios, pool decks, and driveways. Concrete pavers are available in an almost infinite number of sizes, colors, and maintenance requirements. If properly maintained, pavers can last a lifetime, but if they are not, stains or fading over time can diminish the aesthetic value of your investment. Applying a sealer to the concrete pavers on your property may be necessary to preserve the beauty and durability of outdoor hardscapes after you restore pavers. But should you seal your pavers is a question you should be asking yourself if you are having a paver driveway or patio installed.

Although patio pavers are adaptable and look beautiful in almost any outdoor setting, it is crucial to seal them in order to maintain their appearance and functionality for many years to come. Key advantages of sealing after you restore pavers are listed below.

Keep them from fading

Paver sealants are useful for preventing UV ray-induced deterioration of the paver surface. Many materials degrade due to UV deterioration when exposed to the light for an extended period of time. The colorful pigments in the concrete pavers might gradually fade over time regardless of how durable the installed pavers are. When you seal the pavers, the hues are will be kept brilliant even in direct sunshine.

Enhance the colors

Sealers function quite similarly to the varnish that other sealers offer for wooden surfaces. Concrete paver hues and contrasts can be enhanced with sealers to add more aesthetic interest. Some sealants generate an appealing patio surface by giving the surface a "Wet Look." A knowledgeable contractor may give you a demonstration on-site of the appearance that would look best in your home. However, you should keep in mind that not every sealant will look good on your pavers. Test out the available option before making a choice.

Stabilize the joint sand

The joint sand between the pavers is hardened by joint stabilizing sealers. This offers the additional benefit of preventing displacement from wind, rain, and insects that can cause pavers to sink or shift. This works very well to keep sand out of swimming pools and pool decks. Joint stabilizing sealers also aid in preventing weed development between paver joints.

Simplify stain removal

The most significant benefit of sealing pavers is making pavers less porous. This helps reduce the ability of pavers to absorb oil, dirt, etc. If accidents do occur, sealing your concrete pavers will make cleanup easy.

Restore Pavers

Why You Should Hire a Professional in Paver Restoration San Diego

Your landscape is the first thing visitors and passersby see when walking by your property. Making sure it looks amazing will not only show that you are a responsible homeowner but will add significant value to your property. However, even with daily care, there will come a time when you will need to do more than cleaning in order to restore your pavers. When cleaning is not enough, what you need will be paver restoration San Diego trusts.

The purpose of paver restoration in San Diego is to restore your pavers back to their original form. This may include replacing missing, broken, or sunken pavers. It may also require you to seal your pavers in order to prolong their life. While it is possible to do this on your own when you need lasting results the best move is to bring in an expert in paver restoration San Diego. But why exactly should you consider hiring a professional paver as opposed to tackling the paver problem on your own?

You don’t have time for DIY

Nowadays everyone is very busy. For most homeowners, when they elect to fix up their pavers, they end up postponing the task for months or even years. This is because there is never a perfect time for you to get started on the restorations. Instead of postponing paver restoration, you can bring in an expert to get the work done. There are many companies that offer paver restoration services. They will come when you need them and work around your schedule and budget. They will guarantee that your yard never looks neglected and that the restorations are done on time and with perfection. This is the grand beauty of hiring an expert.

You don’t have the right equipment and expertise

Having the time to restore your pavers is simply not enough. For your efforts to be appreciated, you need the right expertise and equipment. As a homeowner, investing in costly paving equipment may not make any sense. While it is possible to rent the equipment you need, you may not have the skills to use them properly. At the end of the day, DIY ends up being a waste of time and money. You might even end up compromising your pavers even further. If you lack the expertise and equipment needed for paver restoration, the best thing you can do is leave the restoration task to the experts. They will get everything done perfectly the first time.

The damages you see might just be the tip of the iceberg

The reason your pavers have weeds growing through them or they are dislodged, sunken or broken may not be so obvious. An expert will be able to get to the root of the problem, correct it and ensure the paver problem never recurs any time soon.

Paver Restoration San Diego

 

Paver Restoration – Should You Get Your Pavers Sealed?

Although sealing pavers has numerous advantages, it is not strictly necessary after paver restoration. It truly depends on what you want out of pavers and how long you want them to stay beautiful. Because most modern paver sealers now include an additive that will harden the joint sand, it is less likely that you will experience settling or shifting brought on by joint sand loss.

In light of everything, you should seal your pavers after paver restoration. Although most paver manufacturers will tell you that sealing your pavers is not necessary, it is highly advised. This is because pavers that are not sealed will be more likely to develop weeds in the joints, they will fade and lose their color from wear and UV breakdown.

Your pavers won’t decay and wither away if you don’t seal them. You will probably just need to clean the pavers more frequently, and the stains will be more difficult—and at times impossible—to get rid of. Sealing your pavers is meant to shield pavers from the sun rain, snow, and ice. It is important even when you installed pavers that are designed to be UV resistant. Sealing can shield your pavers from spills, stains from oil, and other foreign objects that may fall on them. As long as you wash it away as soon as you detect it, sealing leaves a thin, invisible layer on top of your pavers that deters water, oil, and any other substance you could drop by accident.

If you don’t seal your pavers, it is highly likely that pavers will sink and weeds and plants will develop in the sand used in the paver joints. However, sealing pavers with a joint stabilizing sealer will harden the sand in the joint making it very hard for weeds to grow. A professionally placed paver patio with correct drainage would go a long way to avoiding weeds.

Many individuals are perplexed as to where the weeds in paver joints originate. The majority of the time weeds in pavers are caused by seeds from nearby weeds that are blown in and dropped into the sand joint. It is almost a given that you will have weeds in your pavers if you have a lot of weeds in your garden or flowerbeds. Of course, weeds can be fought off by sealing your pavers with a joint stabilizing sealant.

Have you noticed pavers sinking or shifting? After restoration, you can prevent these issues by getting the pavers sealed. The main contributor to paver shifting is a paver joint that is devoid of sand. Each paver is separated from the others by the sand in the joint. When the sand is gone, the pavers can move about more freely because there are now little gaps between them. By using a joint stabilizing sealer to seal your pavers, you might stop sand loss, which would stop your pavers from settling or shifting.

Paver Restoration

 

Paver Restoration Company San Diego – Why You Should Not Pressure Wash Concrete Pavers

Getting pavers installed on your patio, driveway or anywhere in your compound will not only add value to your property but also make it more attractive and simplify maintenance. However, it is good to note that no matter how well you care for your pavers, you will at one point in time need paver restoration. When this time comes, it is always wise to leave the work to a reputable paver restoration company San Diego trusts. This is for the simple reason that paver restoration is not as straightforward as most people think. There is also the fact that simple mistakes can really damage your pavers. In this post, our focus will be on why you should avoid pressure washing concrete pavers.

Pavers for patios and driveways become soiled over time and develop moss, weeds, and black mold. The majority of paver owners consider either renting a pressure washer from their neighborhood hardware shop. Very few people consider the wise decision of hiring a paver restoration company San Diego trusts for paver cleaning and restoration. Some homeowners simply hire a pressure washing business to clean their pavers. It is strongly advised against pressure washing concrete pavers unless you are very experienced and have the proper equipment. This is because doing so can easily damage the surface finish. This is more so on newer pavers.

Typically, a jet style tip is needed to clean pavers with a pressure washer. The surface will be harmed by this pressure. Generally speaking, using a fan tip won’t hurt, but you probably won’t get the level of cleanliness you want.

Small aggregates all the way down to fines are included in the concrete mixture used to make concrete pavers. The top of the particles can be raised by concrete paver producers to make the surface of the paver smoother. These fines are easy to remove from the surface using a high-psi pressure washer. This means an inexperienced operator can easily expose the smaller aggregates in the paver. The majority of the color of the paver’s surface is also held by these particles in the paver. Without the fines, you’d essentially be left with the color of the small aggregate since they don’t absorb color nearly as well.

With that in mind, it is always wise to leave the cleaning to the experts. The best thing about retaining the services of a paver restoration company in San Diego is that the team will not only clean the pavers but also fix any problems the pavers may have. Their work will not only leave your pavers looking amazing but will also help the pavers last longer.

Paver Restoration Company San Diego

 

Paver Restoration Company – Does Sealing Pavers Prevent Weeds, Moss and Algae?

The main role of a paver restoration company is to restore the beauty of your pavers. This often involves cleaning the pavers, removing weeds, moss, and algae, and replacing missing or damaged pavers. While the service will restore your pavers, the results will be short-lived. This is because the pavers will still be exposed to the elements. The best way to make the results last longer is by getting your pavers sealed.

A paver sealant includes a polymer additive that seeps into the sand between the pavers. This makes the sand hard thus making it hard for weeds to germinate or grow through. Consequently, hiring a paver restoration company to seal your pavers will prevent the growth of weeds by up to 90%.

However, it is good to note that there are circumstances that may alter the efficiency of a paver sealer. There are also a couple of things that can be done to completely prevent the growth of weeds and other vegetation between the pavers.

Why weeds, moss, and algae grow

The main reason why weeds, algae, and moss grows between the pavers is because of faulty or inadequate paver drainage mechanism. Little to no exposure to the sun further contributes to the problem. Inadequate drainage may also be caused by the following:

  • Sunken pavers
  • Improperly sloped pavers
  • Patios with stone walls around the perimeter
  • Mounded landscape beds

When there is inadequate drainage, the pavers will become damp. As a result, airborne organic materials will start sticking to the damp pavers. Within no time, the organic materials will promote the growth of algae and moss. It is also possible for airborne seeds from grass and weeds to stick to damp areas and grow.

How to prevent growth on pavers

Most weeds, moss, and algae grow on pavers because of poor drainage. The best way to fix this issue is to ensure there is proper drainage. The risk of future moss, weeds, and algae growth can be reduced by getting your pavers sealed. Getting pavers sealed ensures that the pavers never become damp because they will have a coat that prevents water from getting in. Sealed pavers are also easy to clean which means organic materials will be removed easily from the top of the pavers.

Here are a few additional things you can do to prevent the growth of weeds, algae, and moss:

  • Keep the pavers clean. You can clean them using a leaf blower or by sweeping.
  • Rinse the pavers using a garden hose and nozzle every few weeks.
  • Treat the pavers with diluted outdoor bleach solution if they are prone to the growth of weeds, moss, and algae.

Getting pavers sealed will not only reduce the risk of vegetation growth but also maintain the beauty of your pavers longer as well as simplify maintenance. All you need to do is find a good paver restoration company to help with sealing.

Paver Restoration Company

 

Restore Pavers San Diego – How to Seal Pavers Effectively

After you restore pavers San Diego, the next thing you should do is get them sealed. Sealing pavers make them retain their good condition longer as well as make maintenance easier. However, anyone that has been in the paver sealing industry will tell you that the old ways of sealing pavers no longer work. This is because the paver manufacturing process has significantly evolved. Consequently, new ways of sealing pavers have also been created.

With an ever-increasing demand for paver installations, the demand for sealing products is ever on the rise. It is up to you to find the sealer to use after you restore pavers San Diego. In this post, we will be taking a look at some of the key things you should do to effectively seal dense and porous pavers.

Paver quality standards

The standards for the manufacturing of concrete pavers are set by the American Society for Testing and Materials. The standards apply to the regular thick pavers and not the thin pavers that are used as an overlay on patios, pool decks, and walkways. As a homeowner, you should insist on installing pavers that meet the American Society for Testing and Materials standards. They will be more durable and require less maintenance.

Sealing porous pavers

Historically, contractors would approach a paver sealing project knowing all that will be needed is two coats of the film-forming sealer. The first coat would soak into the paver while the second delivers the desired level of shine. When working with porous pavers, the challenge is these pavers keep absorbing the sealer and in no time, your pavers will start looking dull. This is why contractors today vary their techniques and sealer usage to account for paver porosity. There are sealers that have been engineered to fill the pores of pavers without forming a film. Always pick a sealant that is designed for porous pavers.

Sealing dense pavers

Dense pavers are also challenging to seal. Dense pavers are mostly manufactured for commercial applications. The manufactured stone is very dense and should be treated in the same way you treat natural stone when sealing. To avoid adverse problems like having to use an excess sealer, you should go for sealers that are designed for dense pavers. When sealing dense pavers, you have to understand that it doesn’t absorb as much of the sealer. Consequently, applying less sealant is the way to go.

Whether you are sealing porous or dense pavers, the best way to go is to hire a professional to help with the work. An expert will know which sealer to use and how much of it to use. They will also prepare the pavers properly to ensure the best results.

Restore Pavers San Diego

 

Restore Pavers – Why Should You Seal Your Pavers

After putting in a lot of time and money to make something beautiful, it is natural to want to preserve it for as long as possible. Pavers not only make your home beautiful but also improves its resale value. However, it is important to note that the condition of your pavers will degrade over time. That is where the need to restore pavers comes in.

Paver restoration involves fixing damaged pavers, getting the pavers cleaned, removing weeds and refilling the sand in the spaces between pavers among other things. It is only after you restore pavers that you will be able to keep them looking beautiful and make them last longer. However, the frequency of paver restoration can be reduced significantly by getting the pavers sealed by a professional paver. Here are the top reasons why you should get your pavers sealed.

Protect the surface of pavers

When unsealed, pavers are directly exposed to the elements. This means each raindrop will impact the paver directly and the harmful UV rays from the sun will tarnish each paver directly. This exposure is what causes pavers to degrade faster.

Applying a sealer adds a layer of protection over the pavers. The sealer will safeguard the pavers from damage it faces from mold, dirt, grime and weathering. The protective coat repels particles that might cause staining such as red wine and oil spills. It also keeps moss, weeds and grass from growing in the joints while at the same time deterring insects and ants.

Enhance the texture and color of pavers

After installing new pavers, you definitely want the amazing texture and color to last forever. That will not be possible due to wear. You can, however, prolong the life of the amazing textures and colors by getting your pavers sealed. The protective finish will enhance the texture and color of your pavers. There are also some sealants that offer unaltered appearance while others can be used to enhance the color of pavers.

Makes it easy to clean pavers

Unsealed pavers can trap dirt within them and they stain easily. This makes it harder for you to get them cleaned. After you restore pavers, sealing them will add a layer that keeps dirt and stains from getting into the pavers.

It is recommended to seal pavers as soon as the project of installing new pavers is completed. If you missed that window, you can restore the pavers then seal them right away. Keep in mind there are numerous paver sealers in the market. An experienced professional will help you pick the sealer that is ideal for your pavers and region.

Restore Pavers

 

Paver Restoration San Diego – Which Types of Sealers Should You Use

Do you have pavers installed? If you do, then you know they require work to maintain their look. Fortunately, you no longer have to go through the hassle of cleaning and repairing your pavers every couple of months. This is all thanks to paver sealers. After a paver restoration San Diego, a paver sealer will protect your pavers from damage from freeze-thaw, salt or chloride exposure as well as mold and mildew. In addition to that the sealer will make it easier for you to clean the pavers irrespective of whether you are dealing with dust or oil spills. Even so, to get the best results, you have to select a sealer carefully. Here are the main considerations you should make when choosing a sealer.

Solvent based versus solvent based sealer

As you may already know, the solvent based sealers are bad for the environment. As a result, manufacturers are discontinuing the production of solvent based sealers. It is also good to note that solvent based sealers are much harder to apply. This is why more people are turning to water-based sealers after paver restoration San Diego. Water based sealers are preferred because they are easy to spray and seal joint sand better than solvent based products. This is because water based sealers soak down into the sand. Solvent based sealers only work great if you simply want to seal the top surface.

There is also the option of water based acrylic sealers. This solve the problems of solvents and offer better joint sand stabilization. You need to use high solids acrylic sealers or urethane modified acrylic sealers. If you don’t do this, the sealer will lose its glossiness in 6 to 12 months.

Polyurethane versus acrylic sealer

The water based polyurethanes are preferred because they are tougher than acrylics. They perform better outdoors thanks to their UV resistance and resistance to brake fluid, chemical oil and chlorine. If you are searching for the best water based polyurethanes, stick to the 2-part products that need to be mixed to form a sealer. The best thing about these products is they are less sensitive to moisture. You can apply them as soon as you are done with pressure washing. This allows for same-day sealing.

A lot goes into sealing pavers. While the task might seem simple, it is always good to leave the work to a professional. A professional will not only make sure the pavers are in perfect condition but also use the right paver sealer.

Paver Restoration San Diego

 

Paver Restoration – How Should You Seal Your Pavers

Getting pavers sealed right after paver restoration is the best way to guarantee they not only last longer but also maintain the renewed look for longer. However, the results you get will depend on the product used and how well you apply the sealant. In this post, we shall be taking a look at the steps you should take when getting your pavers sealed.

Clean them

The first step is to get the pavers cleaned. The purpose of applying a sealant is to make the paver restoration results last longer. If you seal over dirty or damaged pavers, the results will not be as great. That is why the first step in any project is to hire a professional paver to clean and repair the pavers.

Use an appropriate cleaning agent to remove oils, mold and mildew and other dirt from the pavers. You should never apply the sealant over efflorescence. Doing so will only seal the efflorescence to the surface. If your pavers have already been sealed and you see efflorescence, you will need to remove the old sealant. This is because efflorescence will appear after you seal the pavers arise. This is because efflorescence rises up from within the sealers.

Remove debris

It is imperative that you grade sand into the joints and fill to the required level. The extra sand needs to be removed from the top of the pavers. You can use a broom or a leaf blower for this. Removing sand and other debris will ensure the final results after applying the sealant is amazing.

Apply the coat

Now that the pavers are clean, the next step is to apply the sealant. Start by applying a single coat of sealer over the pavers. Pay attention not to put too much sealer into the joints. For the joints, you should consider spraying the sealer into them rather than pouring it in. Any excess sealer should be back rolled or back brushed into the joints. You will need an additional coat to offer maximum protection and increase the gloss.

These are the steps you should take when sealing your pavers. It is important that you never apply sealers when there is inclement weather or under direct sunlight. Temperatures that exceed 90 degrees F will cause fast drying which may not give you enough time to remove bumps. You also need to invest in high-quality sealant, especially for the driveway and patio. Keep in mind that a cheap sealer will have to be reapplied more often and may cause problems when you switch to another sealer.

Paver Restoration