Restore Pavers San Diego – When Should You Seal Pavers

No matter how well you get your pavers installed and how well you care for them, there will come a time when you will need to restore pavers San Diego. This is because these outdoor elements are constantly exposed to the elements. They will, without a doubt, fade, chip, break, or sink over time. When this happens, you can fix the damaged pavers cost-effectively. But did you know that getting your pavers sealed will make them last longer and look better?

While pavers are versatile and look amazing in any outdoor environment, it is important to get them sealed so as to keep them functioning and looking good for the longest time. Getting the pavers sealed will reduce the frequency of having to restore pavers San Diego. You will also enjoy a number of benefits including the following:

  • Sealing protects pavers from fading. UV rays are what cause pavers to fade. You can reduce UV degradation by getting the pavers sealed.
  • Enhance the colors. A sealer works like a varnish. The sealer will draw out the vibrant colors of your pavers. You can even go for sealers that have a wet look. This will be great for the patio paver.
  • Stabilize the interlocking joint sand. When interlocking sand is blown away, individual pavers start shifting and causing all manner of problems. Getting pavers sealed will lock this sand in place.
  • Stain removal. Sealed pavers are less porous. They don’t soak up dirt, oil, and other substances. They are thus easier to clean.

The above are the key benefits of getting your pavers sealed. But when should pavers be sealed?

When to Seal Pavers

The majority of manufacturers recommend that you get the pavers sealed after 1 year after installation. The wait helps the naturally-occurring dusty build-up (known as efflorescence) to escape from the pavers. If you don’t wish to wait that long before getting your pavers sealed, you can use breathable sealers. With these sealers, you can get the pavers sealed as soon as they are installed. This is because the efflorescence will escape through the sealer.

Getting your pavers sealed is a great decision irrespective of how old your pavers are. You simply need to find the right sealant. The sealant you use has to be designed for your type of pavers. Second, you have to restore the pavers before getting them sealed. Third, the sealer has to be applied correctly. It doesn’t hurt to work with an experienced professional to help with that.

Restore Pavers San Diego

 

Restore Pavers San Diego – How to Seal Pavers Effectively

After you restore pavers San Diego, the next thing you should do is get them sealed. Sealing pavers make them retain their good condition longer as well as make maintenance easier. However, anyone that has been in the paver sealing industry will tell you that the old ways of sealing pavers no longer work. This is because the paver manufacturing process has significantly evolved. Consequently, new ways of sealing pavers have also been created.

With an ever-increasing demand for paver installations, the demand for sealing products is ever on the rise. It is up to you to find the sealer to use after you restore pavers San Diego. In this post, we will be taking a look at some of the key things you should do to effectively seal dense and porous pavers.

Paver quality standards

The standards for the manufacturing of concrete pavers are set by the American Society for Testing and Materials. The standards apply to the regular thick pavers and not the thin pavers that are used as an overlay on patios, pool decks, and walkways. As a homeowner, you should insist on installing pavers that meet the American Society for Testing and Materials standards. They will be more durable and require less maintenance.

Sealing porous pavers

Historically, contractors would approach a paver sealing project knowing all that will be needed is two coats of the film-forming sealer. The first coat would soak into the paver while the second delivers the desired level of shine. When working with porous pavers, the challenge is these pavers keep absorbing the sealer and in no time, your pavers will start looking dull. This is why contractors today vary their techniques and sealer usage to account for paver porosity. There are sealers that have been engineered to fill the pores of pavers without forming a film. Always pick a sealant that is designed for porous pavers.

Sealing dense pavers

Dense pavers are also challenging to seal. Dense pavers are mostly manufactured for commercial applications. The manufactured stone is very dense and should be treated in the same way you treat natural stone when sealing. To avoid adverse problems like having to use an excess sealer, you should go for sealers that are designed for dense pavers. When sealing dense pavers, you have to understand that it doesn’t absorb as much of the sealer. Consequently, applying less sealant is the way to go.

Whether you are sealing porous or dense pavers, the best way to go is to hire a professional to help with the work. An expert will know which sealer to use and how much of it to use. They will also prepare the pavers properly to ensure the best results.

Restore Pavers San Diego

 

How to Restore Pavers San Diego

Do you need help on how to restore pavers San Diego? If you do, this post is for you. Even when you use the best paving materials and get the work done by a professional, you will at one point in time require paver restoration to be done. This is because pavers are exposed to high traffic and all manner of elements. They are bound to get damaged over time. The good news, however, is there are a couple of things you can do to restore the beauty of your pavers. Here are some of the things you should do.

Replace broken and chipped pavers

There is nothing that tarnishes an outdoor space more than broken and chipped pavers.  Chipped, broken and uneven pavers collect debris, dirt and standing water. While replacing broken and chipped pavers is a difficult part of paver maintenance, it will improve the look and safety of your outdoor space. While it is possible to restore pavers San Diego on your own, it is always good to leave the work to the experts. This is because if you install the pavers poorly, more problems will follow within no time.

Remove weeds

Another issue that homeowners deal with is weeds growing between pavers. This mostly happens when the spaces between pavers were not filled sufficiently during installation. The problem is also common where the base of the pavers was not prepared properly. If there are weeds growing between pavers, you can tackle them by pulling them out. While this can be tedious and time-intensive, removing the weeds will ensure they don’t come back. You can make the task easier by wetting the area first and then using a weeding tool. Herbicides can also be used to kill weeds.

Repair the grout

At times, your pavers look unpleasing because the grout has seen better days. Extreme temperatures wreak havoc on paver grout. This can cause it to discolor or chip. Excessive wear and tear can also be seen if the grout was not maintained properly. While it is possible to repair the grout on your own, it is always better to hire a professional. A professional will not only address the grout problem but also any other issue that may be damaging your pavers.

Keep them clean

The simplest and most effective way to restore pavers in San Diego is to keep them clean. Start by breaking out the broom and give your pavers a good rinse. Always wash with a recommended cleaning solution.

Get them sealed

If you want to make it easy to clean pavers and cause them to last long, you should consider getting them sealed. Sealing pavers protects them from the elements thus making them last longer. Find the right paver sealant and get it installed by a professional. You will need to reseal your pavers every one to two years.

Restore Pavers San Diego

 

Restore Pavers San Diego – How to Pave the Driveway Properly

Are you tired of having to restore pavers San Diego every few weeks? Chances are your pavers are requiring too much attention because they were installed poorly or you are handling paver restoration poorly. This is more so when it comes to the driveway. This is a high-traffic area and you will see most problems with pavers in this area. If you are only now considering the installation of new pavers and don’t want to deal with unnecessary restorations in the future, here are some of the things you should do.

Prepare the driveway sufficiently

The common mistake that often forces homeowners to spend a considerable amount of money when they restore pavers San Diego is failing to prepare the driveway properly. If the base is not solid enough, you will find yourself dealing with all manner of paver problems. If the existing driveway is in a bad shape, you need to start by getting it fixed. At times, you will have to remove the existing concrete slab if the driveway has poor drainage or potholes. You also need to ensure the driveway is free of debris. This includes weeds sprouting through the cracks. The area must also be perfectly level.

Lay the base layer

Your pavers will need a solid base in order for them not to crack or shift. This is why the next thing you should do is lay a base layer. This is where the pavers will stick to. The base layer has to be firm and consistent otherwise the new pavers will not be perfectly flat and might end up shifting and cracking.

Lay the pavers

The next step is laying the pavers. This has to be done carefully to ensure there is consistency. Start laying the pavers at the lowest corner of the driveway and move from there. You can lay them in any pattern you want. It is, however, important to set each paver at an equal distance from each other. You should also refrain from laying the pavers in multiple patterns as that will ruin the end result.

Fill the joints

Once all the pavers have been laid down and you love the resulting pattern, the next step is to fill the joints. These are the spaces between the pavers. Failing to fill these gaps will cause weeds to grow between them and also attract pests. The pavers are also more likely to shift when the gaps between them are not filled. You can use sand to fill the gaps. Once you are done, sweep the excess sand away.

It is not as easy as it sounds to install pavers or handle paver restorations in San Diego. If you want lasting results, consider leaving this task to the experts.

Restore Pavers San Diego